 |
site map / search / help | |||||
| Home Page | Products | Support | Downloads | Dealers | What's New | |
| Support: |
| Press Room: |
| Help: |
| IC-746 + IC-PW1 Control Software Interconnection | |||
| 1) Make sure the CT-17 is powered up. Connect the
CT-17 output 1 to IC-746, and output 2 to IC-PW1.
2) Power up the IC-746 and set up the CI-V communication per the IC-PW1 manual. The CI-V set up will vary between the early and the latest IC-PW1 units. 3) Power on the IC-746 and the IC-PW1. The IC-PW1 should now automatically select the band the IC-746 is set to. 4) Now start the software, and set the software com port setting to the port you have the CT-17 connected to. The software should recognize the IC-746 and show the exact frequency on the computer screen the IC-746 is tuned to. 5) As you change bands on either the IC-746 or the software, the IC-PW1 will follow that band change. If you change bands on the software, both the IC-746 and the IC-PW1 will follow that band change.
|
|
All contents ©1996-2003 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. Terms of use. |